Gateway - Bertin Exensor

Gateway

The Gateway is the hub where all information is collected and stored. It can work either as a base station or a repeater. Equipped with two radios for short- and long-range communications between sensors and gateways respectively, it has the capability to connect to other networks, allowing greater system flexibility.

The short-range radio enables communication with all deployed sensors through the mesh network within a 1 km range. The long-range radio relays sensor data and imagery at a distance of up to 15 km between Gateways. An extended communication range can be achieved by deploying several Gateways in repeater mode. The Gateways can be connected to 3G/4G modems, Satcom or any other backhaul network via TCP/IP, to enable remote communication and control.

The Gateway can be configured in three different modes, base station, repeater (acting as a relay), and mobile base (acting as a mobile base station). It can be deployed as an autonomous base without having a computer connected to the network, to store data from deployed sensors and cameras for later retrieval. The system can operate unattended for months.

Download the brochure

  • Base, repeater or mobile base functionality
  • 1000 m communication range with sensors and 10 km communication between gateways
  • USB interface for communication with backbone network
  • Encrypted communication (AES-256)
  • Data storage and silent mode capacity
  • Anti-tampering functionality
  • GPS for self-localization
  • An external battery, solar panel or fuel cell can also be connected to the Gateway
  • Size: 115mm x 82mm x 170mm
  • Weight: 3.2 kg
  • Operation time: 30 days on built in battery
  • Temperature: -32 to +71 degrees Celsius in operation
  • Environmental: MIL-STD-810
  • EMC: MIL-STD-461
  • Output power: Short-range radio: 0.5 W; long-range radio 10 W

ANY QUESTIONS? CONTACT AN EXPERT

Please fill in this form if you wish to contact our sales team or receive further information.

Add a question !

Add a question